Does anyone have any idea how to use a radioberry with sdrangel. I have compiled sdragel for the raspberry pi, and have the gui running.
I will be happy to just see a waterfall at this point in time so i know i am getting data from the radioberry hardware. Long term i am more interested in probably running sdrangel as a server but i am also interested to see what kind of performance i can get running it as a standalone device too
Radioberry
-
mattsoftware
- Posts: 3
- Joined: Thu May 29, 2025 6:10 am
Re: Radioberry
Could perhaps try via Soapy
-
mattsoftware
- Posts: 3
- Joined: Thu May 29, 2025 6:10 am
Re: Radioberry
I apologise for being a bit of a newbie for this one. But its my understanding Soapysdr requires some drivers built for it as its just an abstraction library? I think I skipped the soapysdr when building sdrangel, so I'm in the process of rebuilding with the soapysdr module. However I'm not convinced (happy to be wrong) thats all that is required to get it working.
At least you have pushed me down a different route to try
I'll report back if I can get sdrangel built on the pi with soapy compiled in and see what happens.
Thanks
At least you have pushed me down a different route to try
Thanks
Re: Radioberry
Don't know, as haven't tried, but in addition to the basic soapy driver, you will need the soapy / radioberry driver - E.g: https://github.com/paulh002/SoapyRadioberry - and then whatever that requires.
-
mattsoftware
- Posts: 3
- Joined: Thu May 29, 2025 6:10 am
Re: Radioberry
Is there a way to find out if SoapySDR is successfully compilled into sdrangel?
So I did another build (this one took WAY longer than the previous one, and required more swap than previous, so it was def doing something more than before). I have also got SoapySDRUtil --find showing my radio berry device. So I think I have that bit all working.
When I boot up the sdrangel process it does not have soapy listed in the dropdown for input devices. At first I thought it was becuase it was not finding the soapy device, but now I have that sorted I was expecting it to appear in the list. So at the moment I'm thinking either the SoapySDR library was not compiled into sdrangel, or I need to do something else to kick it in. So I am at a little bit of a loss how to work out what the next step is unfortuately.
Any help appreciated!
Thanks.
So I did another build (this one took WAY longer than the previous one, and required more swap than previous, so it was def doing something more than before). I have also got SoapySDRUtil --find showing my radio berry device. So I think I have that bit all working.
When I boot up the sdrangel process it does not have soapy listed in the dropdown for input devices. At first I thought it was becuase it was not finding the soapy device, but now I have that sorted I was expecting it to appear in the list. So at the moment I'm thinking either the SoapySDR library was not compiled into sdrangel, or I need to do something else to kick it in. So I am at a little bit of a loss how to work out what the next step is unfortuately.
Any help appreciated!
Thanks.
Re: Radioberry
You need to use --soapy command line argument.
