Adding new decoder

MSF, DCF77, TDF, WWVB, JJY, RBU, PCSK-225
Post Reply
andyrs
Posts: 40
Joined: Thu Jan 26, 2023 3:50 pm
Location: KO11

Adding new decoder

Post by andyrs »

Hi Jon et al,

a couple of days ago Polish government fired up a regular transmission of digital time signal named e-CzasPL (e-TimePL). From what I gather frames are kinda similar to DCF77 and carrier phase modulation is used (I guess?). Maybe you could look into this and implement it in your RadioClock plugin?
Signal is brodcasted at 225 kHz on PR Jedynka programme. I could provide baseband signal recordings, and also work as beta tester if you decide to try it out.
Here are some screenshots of waveforms i capture today

1. over a minute dPhi capture shows some slots, at ~2s mark is 'half-minute-slot' in real time
20231226_150159.png
20231226_150159.png (31.89 KiB) Viewed 25481 times
^this may contain other frames not with time signal, as I just now learned that other data are also transmitted on this frequency

2. this what looks like a full minute frame - the _proper signal_ I think
20231226_150122.png
20231226_150122.png (10.5 KiB) Viewed 25481 times

Frame documentation is unfortunetaly in polish language only, so... maybe could be translated online somehow, if not I could try to do it myself. Link: https://docs.google.com/document/d/1DqA ... M-cIQ/edit

Cheers!
srcejon
Posts: 537
Joined: Thu Jan 19, 2023 2:30 pm
Location: London
Contact:

Re: Adding new decoder

Post by srcejon »

andyrs
Posts: 40
Joined: Thu Jan 26, 2023 3:50 pm
Location: KO11

Re: Adding new decoder

Post by andyrs »

Hi again

Found the frame documentation for e-CzasPL in english: Here is a couple of minutes recording of the 225 kHz signal
https://fastupload.io/4d9f52cc78a3f0b8

Also, i've seen on Github, that NBU (66.666 kHz) was considered some time ago... Any decision you made? I could also record signal/betatest that as well.

Cheers!
srcejon
Posts: 537
Joined: Thu Jan 19, 2023 2:30 pm
Location: London
Contact:

Re: Adding new decoder

Post by srcejon »

andyrs
Posts: 40
Joined: Thu Jan 26, 2023 3:50 pm
Location: KO11

Re: Adding new decoder

Post by andyrs »

Very nice, many thanks for the work done.

PCSK225 working well here, though i see it being a consistent '1 sec late' vs. MSF, RBU, DCF and TDF. For RBU to get a decode, Threshold have to be set to ~6 dB instead of default 2 dB. I guess it's because a much wider bandwidth.

20260930_154633-region.png
20260930_154633-region.png (122.28 KiB) Viewed 3041 times
srcejon
Posts: 537
Joined: Thu Jan 19, 2023 2:30 pm
Location: London
Contact:

Re: Adding new decoder

Post by srcejon »

A man with one watch knows what time it is, but a man with two* watches is never sure


* five
srcejon
Posts: 537
Joined: Thu Jan 19, 2023 2:30 pm
Location: London
Contact:

Re: Adding new decoder

Post by srcejon »

Also, I think I need to find a way so you can contribute your theme for others to use 8-)

I could probably add a way so you can specify styles as CSS, if that's any use. Some widgets would probably need some tweaking to support it.
andyrs
Posts: 40
Joined: Thu Jan 26, 2023 3:50 pm
Location: KO11

Re: Adding new decoder

Post by andyrs »

srcejon wrote: ↑Wed Sep 30, 2026 5:51 pm A man with one watch knows what time it is, but a man with two* watches is never sure

* five
True that :D

For the theme, yes please tell what you'd need.
I think that two files are of most importance: rollupcontents.cpp and main.cpp for colors?
Post Reply